Loading ...
Loading ...
Loading ...
ENGLISH
Installation Manual
5
Important Preparation Suggestions
1. Chamfer all exposed edges of decorative laminate
to prevent damage from chipping.
2. Radius corners of cutout and file to Insure
smooth edges and prevent corner cracking.
Recommend 1/4“or 3/8“diameter drill In each
corner.
3. Rough edges, inside corners which have not been
rounded and forced fits can contribute to cracking
of the countertop laminate.
This cooktop has been designed with wide
tolerances of cut-out to cover possible
replacement with other brands. We recommend to
that you consider the minimum dimension of cut-
out size In the case of new Installation.
Some cut out sizes for possible replacements:
CUTOUT
WIDTH
AB C D E F G
24” (60 cm)
22 5/8”
(57,4 cm)
22 13/16”
(58,0 cm)
19-1/4”
(49.0 cm)
19-9/16”
(49.7 cm)
24”
(60 cm) min
18” (45.7 cm)
min Height from
countertop to
nearest cabinet
on either side
of unit
30” (76.2
cm) min.
(see note*)
Clearance from
countertop to
unprotected
overhead
surface
2” (5 cm) min
Clearance from
cutout to side
wall on the left
and right of the
unit
13” (33 cm)
Depth of
unprotected
overhead
cabinets
30” (76.2cm)
28-11/16”
(72.9 cm)
28 15/16”
(73.5 cm)
19-1/4”
(49.0 cm)
19-9/16”
(49.7 cm)
30”
(76.2 cm) min
36” (91.4 cm)
34-1/16”
(86,5 cm)
34-5/16”
(87.2 cm)
19-1/4”
(49.0 cm)
19-9/16”
(49.7 cm)
36”
(91.4 cm) min
IMPORTANT
Under the cooktop it is necessary to install a
partition as shown in .
* NOTE
24” (61 cm) min. clearance if bottom of wood or metal cabinets is protected
than No. 28 MSG sheet steel 0.015” (0.04 cm) stainless steel, or 0.024”
(0.06 cm) aluminum or 0.020” (0.05cm) copper. 30”(76.2 cm) min. clearance
between top of cooking platform and bottom of unprotected wood or metal
cabinet
Dim . Inches cm
• 24” 22 13/16” x 19-9/16” 58,0 x 49,7
28-15/16” x 19-9/16” 73,5 x 49,7
34-5/16” x 19-9/16” 87,2 x 49,7
Loading ...
Loading ...
Loading ...