Loading ...
8
DC POWER CONNECTION
4. Lift refrigerator door o of bottom hinge and set aside.
5. Remove bottom hinge with Phillips screwdriver.
6. Now remove all plugs and caps from opposite side and place them
%*ƫ0$!ƫ$+(!/ƫ5+1ƫ&1/0ƫ.!)+2!ƫ0$!ƫ/.!3/ƫ".+)ċƫ
7. Using a Philips screwdriver fasten the bottom hinge in place using
the screws you previously removed. 8. Place fridge door on bottom
hinge, then place middle hinge in top hole of fridge door and using
the Phillips screwdriver, fasten the middle hinge in place using the
screws you previously removed.
9. Now place the freezer door on top of the middle hinge, then place
top hinge in top hole of freezer door and using the Phillips screw-
driver, fasten the top hinge in place using the screws you previously
removed.
āĀċƫ%#$0!*ƫ((ƫ/.!3/ƫ3$%(!ƫ)'%*#ƫ &1/0)!*0/ƫ3$!.!ƫ*!!//.5ƫ0+ƫ
ensure they are aligned correctly and closing well against the cab-
*!0Čƫ0$%/ƫ3%((ƫ.! 1!ƫ*5ƫ!4!//%2!ƫ".+/0ƫ1%( ƫ1,
NOTE: Once the doors are reversed and if the gasket does not
meet the cabinet on the hinged side, using a hairdryer or heat gun
heat the gasket while on the appliance. The gasket will expand to
meet the cabinet. Allow 30 mins to cool before opening
IMPORTANT: After transit where the fridge has been on
its side or back, ensure that the fridge is in a level, up-
right position for 12 hours to allow compressor fluids to
redistribute evenly before use.
THIS FRIDGE MUST NEVER BE CONNECTED DIRECTLY
TO ANY AC (alternating current) POWER SOURCE!
THE FRIDGE MUST ONLY BE CONNECTED TO A 12V OR 24V DC
POWER SOURCE, SUCH AS A SOLAR
BATTERY SYSTEM OR CHARGE CONTROLLER.
THE FRIDGE WILL AUTOMATICALLY OPERATE ON EITHER 12V OR
24V DC. THE USER DOES NOT NEED TO MAKE ANY ADJUSTMENT.
Loading ...
Loading ...