Loading ...
Loading ...
Loading ...
37
Charging terminals
CLEANING THE SIDE BRUSH
side brush. Remove such materials at least once a week.
If excessive amounts of foreign materials are stuck to the brush,
there is the risk of damage to the brushes.
If the floor is rough or frequently cleaned, the side brushes may bend or become deformed. In this
case, use the following method to straighten the side brush.
deformed brushes.
2. Turn off the power by switching the main
switch off on the rear off the unit.
to make cleaning the side brush easier. Make
sure that the Robot Cleaner is not in danger of
falling.
5. Press down on the side brush for about ten
seconds so that it is completely submerged in
the water.
6. Slowly wipe the side brush by sliding it through
your hand.
each section of the brush.
8. Use the side brush only after it has completely
dried.
and separate the side brush from the main unit.
2. Remove any hair after the separation.
bottom of the Robot Cleaner, with the 'R' and 'L'
marking of the brush matching the counterparts
on Robot Cleaner.
Side Brush Management
Loading ...
Loading ...
Loading ...