Loading ...
Loading ...
Loading ...
−
−
9 lbf·ft (12 N·m , 1.2 kgf·m)
(2)
(2) oil check bolt
RIGHT SIDE
(1)
(1) transmission oil fill cap
97
Checking & Adding Transmission Oil
Servicing Your Honda
Transmission Oil
Safety Precautions
Running the engine with an improper oil level can cause serious engine
damage.
Refer to on page .
Park your ATV on a firm, level surface.
Check the transmission oil level each day before operating your ATV
and add if needed.
Remove the transmission oil fill cap ( ) and oil check bolt ( ) from
the right crankcase cover.
Start the engine in a well-ventilated area and let it idle for 3 5
minutes. Stop the engine and wait 2 3 minutes to allow the oil to
properly distribute itself in the clutch and transmission.
A small amount of oil should flow out of the oil check bolt hole. If no
oil flows out of the oil check bolt hole, add transmission oil slowly
through the transmission oil fill hole until oil starts to flow out of the
oil check bolt hole. Install the oil check bolt and transmission oil fill
cap.
After inspecting the transmission oil level or adding oil, tighten the oil
check bolt and tighten it to the specified torque:
Install the transmission oil fill cap.
1.
2.
3.
4.
5.
73
12
１１／０５／２５ １１：３３：０６ ３１ＨＰ１６６０ ０１０６
Loading ...
Loading ...
Loading ...