Dji TAKYON Z14120 User Manual

Loading ...

Using the Remote Controller for ESC Conguration

Be sure to remove the propellers before conguring the ESC.

Calibrate the throttle range and switch the motor rotation direction using

the remote controller:

1. Power on the remote controller and receiver. Ensure a good communication

between them.

2. Push the throttle stick all the way up, connect the ESC to the motor

and power on the ESC. The motor will start beeping, alternating

between a double beep and a triple beep with a two-second gap

between each beep. To configure the ESC, carry out each of the

following movements within the two-second gap.

a. Throttle Range Calibration

After the double beep, pull the throttle stick all the way down. A

1-second beep will sound if calibration is complete.

b. Motor Rotation Direction Switch

After the triple beep, pull the throttle stick all the way down. A 1-second

beep will sound once motor rotation direction has been switched.

Loading ...

Dji TAKYON Z14120