Loading ...
5
SHORT CORD INSTRUCTIONS
A short power cord is provided to reduce the risk resulting from entanglement or tripping over
a longer cord. Longer detachable power supply cords are available and may be used if care
is exercised in their use. If a longer detachable power cord or extension cord is used the
marked electrical rating of the extension cord should be at least as great as the electrical rating
of the appliance, and the longer cord should be arranged so that it will not drape over the
countertop or table top where it can be pulled on by children or tripped over unintentionally.
If your product is equipped with a polarized alternating current line plug (a plug having one
blade wider than the other), this plug will fit into the power outlet only one way. This is a safety
feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug
should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
Before using the Skillet for the first time
Remove all labels and wash the pot and glass lid in hot soapy water, rinse thoroughly and dry.
INSTALLATION
• Before using, check that the appliance has not been damaged during transport.
• Install the appliance on a dry flat surface, and out of the reach of children, as some parts of
the appliance reach very high temperatures during operation.
• Always place the glass lid in position during use unless the recipe advises differently.
• Before inserting the plug in the outlet, check that:
- the power of the outlet corresponds to the value indicated on the rating plate applied to the
accessory plug.
- the outlet has a minimum rating of 15 A.
- the outlet is suitable for the plug, otherwise replace it.
- the outlet is suitably grounded.
- the manufacturer declines all liability if this instruction is not respected.
USING YOUR SKILLET
Before using for the first time, wash skillet and cover in dishwasher or in warm, sudsy water,
rinse, and dry. Do not immerse the connector or let the thermost in contact with any liquid.
“Season” the nonstick cooking surface by rubbing lightly with cooking oil. Remove excess oil
with paper towel.
1. Place skillet on a dry, level, heat resistant surface.
2. Insert the connector probe into the skillet so the two electrical pins on the skillet are fully
inserted into the connectorl. Connect cord to outlet.
3. Turn the thermostat to desired temperature (see page 7 for cooking temperature). Remove
cover and preheat skillet. Pilot light goes off when selected temperature is reached (this
takes approximately 5 to 10 minutes).
4. Prepare food for cooking. Because the skillet features a nonstick finish, food may be pre-
pared with little or no oil.
5. Place food in skillet and cook according to temperature-timetable. Heat should be adjusted
according to personal preference and particular food being cooked. During cooking, pilot
light will go on and off indicating desired temperature is being maintained.
6. Turn the thermostat to “MIN” when cooking is completed. Unplug the connector from wall
outlet then from appliance.
Loading ...
Loading ...
Loading ...