Loading ...
Loading ...
Loading ...
13
Cybex Owner’s Manual
6. Place weight stack pin in each plate to verify proper installation.
7. Without selecting any resistance, lift top weight up and down (simulating normal operation.)
8. Verify that the belt is moving smoothly and is routed straight from the top pulley bracket to the
weight belt clamp.
9. Reinstall the six increment weights that were removed.
WRONG
CORRECT
Increment
Weights
10. Turn the Increment Weight Adjusting Knob to select 15 lbs.
Install back shrouds
1. Place shroud back into position on the two bottom screws.
Screw
2. Install the top two screws securing the back shroud.
Screw
3. Install the three Phillips head screws securing the top (back) shroud.
Phillips
Head
Screw (3)
Loading ...
Loading ...
Loading ...