Loading ...
Loading ...
Loading ...
12
Cybex Owner’s Manual
11. Raise guide rod up through mounting hole and install the upper snap ring.
12. Lower guide rod and secure lower snap ring. Repeat for the opposite guide rod.
Belt Routing
1. Verify belt is routed through top of pulley bracket and then route end of belt down to the top
weight.
2. Verify the belt clamp on the top weight is positioned properly with the top pulley. The belt
must have a straight path from the pulley to the belt clamp. Figure shows the top view,
looking from the top pulley down to the top plate.
Top Pulley
Set Screw
Belt
Insert
Increment
Weight
Adjusting
Knob
3. Slide belt through slot in belt clamp.
4. Verify belt and insert are installed properly.
Correct belt routing Wrong belt routing
Stem
Belt
Insert
Stem
Belt
Insert
5. Pull belt tight and secure belt to clamp with the two set screws. Torque set screws 300-350
in-lbs.
Belt clamp
Belt
Belt clamp
insert
Set screws
Loading ...
Loading ...
Loading ...