Loading ...
Loading ...
Loading ...
Conventional Cruise Control
84
●Automatic cancellation by the system
In the following cases, a buzzer sounds a single long beep and the Cruise control function is
automatically canceled ( is displayed on the EyeSight display area.). After the condi-
tions listed below have been eliminated, perform the cruise control set operation again to
reactivate cruise control.
The select lever was moved to a position other than .
The cruise control function can be used again after the lever is returned to the posi-
tion.
A paddle shift switch was operated during
driving with the lever in the position.
The cruise control function can be used
again after the shift indicator returns to .
Vehicle speed drops to approximately 20
MPH (30 km/h) or less (due to a steep uphill
grade or some other reason).
When the Vehicle Dynamics Control is in the OFF mode
- The function can be resumed after Vehicle Dynamics Control has been switched to the
normal mode or traction mode.
Vehicle speed rises to approximately 100 MPH (160 km/h) or more.
The ABS, Vehicle Dynamics Control or Traction Control functions activate.
Any door (except the rear gate/trunk) was opened.
The driver’s seatbelt is unfastened.
The Electronic Parking Brake is engaged (When the brake system warning light is illumi-
nated or flashing).
When the EyeSight system has a malfunction. (“ ” (EyeSight Warning indicator:
Yellow) is turned on.)
The steering wheel is turned significantly in either direction.
The grade of the road is steep.
The Pre-Collision secondary braking has activated.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may
result in an accident.
D
D
MPG
miles
MPH
S02237
OFF is
displayed.
D
D
B1272BE-A.book 84 ページ ２０１６年２月１７日 水曜日 午前１１時４２分
Loading ...
Loading ...
Loading ...