Loading ...
Loading ...
Loading ...
Adaptive Cruise Control
40
Adaptive Cruise Control is available when the engine is turned on.
■ Setting Adaptive Cruise Control
(1) Setting Adaptive Cruise Control to standby status
Press the (CRUISE) switch. At this time, “ ” (Adaptive Cruise Control), your vehi-
cle indicator and the “following distance setting” are displayed on the EyeSight display area
in the multi information display.
The set vehicle speed display will read “- - MPH”.
If the switch is pressed once more, the EyeSight display will turn off. It will also automatically
turn off when the engine is stopped.
To set ready status:
Adaptive Cruise Control can be set when all
of the following conditions are met and
is displayed on the EyeSight display area.
- All doors (except the rear gate/trunk) are
closed.
- The driver’s seatbelt is fastened.
- The electronic parking brake is not
engaged (The brake system warning light
is turned off.).
- The select lever is in the position and
the paddle shift is not operated.
- The brake pedal is not depressed.
- EyeSight operation is not temporarily stopped.
Refer to page 89.
- The road is not a steep slope.
- The steering wheel has not been turned significantly in either direction.
- When Vehicle Dynamics Control is in the normal mode or traction mode.
- The vehicle speed is between approximately 0 MPH (0 km/h) and 90 MPH (145 km/h).
How to use Adaptive Cruise Control
S01876
MPG
miles
MPH
S01908
EyeSight
display area
MPG
A
D
miles
MPH
S02040
READY
indicator
D
B1272BE-A.book 40 ページ ２０１６年２月１７日 水曜日 午前１１時４２分
Loading ...
Loading ...
Loading ...