Loading ...
Loading ...
Loading ...
Removing, Installing, and Replacing Components
43
11
Insert the drive carrier tabs into the chassis slots, then slip the drive
carrier down until the holes in the hard drive carrier align with the
holes in the diskette drive carrier.
12
Route the longest ground wire through the white plastic cable-tie.
13
Replace the two screws that secure the hard drive carrier to the
diskette drive carrier.
14
Replace the system cover (see “Replacing the System Cover” on
page 25).
✍
Be sure to reattach the ground wire at each screw location. You might need long-nose
pliers to reach the ground wire closest to the drive’s power-supply connector.
MAN002B.VSD
Loading ...
Loading ...
Loading ...