Loading ...
Loading ...
Loading ...
Set-Up
Read the entire manual before setting up the treadmill. Place the treadmill where it will be used before beginning
the setup procedure.
Electrical Power Requirements
The treadmill requires a dedicated* line with isolated neutral according to the electrical configurations listed in
the chart below.
Rated Current (Amps)Frequency (Hz)Supply Voltage (VAC)
1850 / 60100
1850 / 60120
950 / 60200
950 / 60220
950 / 60230
950 / 60240+
* One individual branch circuit for each treadmill per NEC article 210-21 (b) (1) and 210-22 (or other appropriate,
country specific electrical compliance guidelines). The hot and neutral wires must each be routed independently
(not looped or tied to other circuits).
Note: Do not modify the plug provided with this product. If the plug does not fit into an available electrical
outlet, have a proper outlet installed by a qualified electrician.
Grounding Instructions
This product must be properly grounded. If the unit malfunctions or breaks down, proper grounding provides a
path of least resistance for the electric current, which reduces the risk of shock to anyone touching or using the
equipment. Each unit is equipped with an electrical cord, which includes an equipment grounding conductor and
a grounding plug. The plug must be inserted into an outlet that has been properly installed and grounded in
accordance with all local codes and ordinances.
Warning: A temporary adapter MUST NOT BE USED to connect this plug to a two-pole receptacle in North
America. If a properly grounded, 20-amp outlet is not available, one must be installed by a qualified electrician.
Models drawing 16 amps or more must be installed on a dedicated line. (Commercial Units Only).
Attention: Si vous êtes aux États-Unis, n’utilisez PAS d'adaptateur temporaire pour raccorder la fiche à un
adaptateur bipolaire. Si aucune prise de 20 A correctement mise à la terre n'est disponible, il convient d'en
faire installer une par un électricien qualifié. Les modèles utilisant 16 A ou plus doivent être installés sur des
lignes qui leur sont réservées. (Gamme commerciale uniquement).
Danger: A risk of electrical shock may result from improper connection of the equipment-grounding
conductor. Check with a qualified electrician if in doubt as to proper grounding technique. DO NOT modify
the plug provided with the product. If it will not fit an electrical outlet, have a proper outlet installed by a
qualified electrician. Any modification to the electrical plug will result in a voided warranty.
Danger: Un branchement incorrect du fil de terre peut entraîner des risques de choc électrique. Consultez
un électricien si des doutes subsistent quant à la technique de mise à la terre. NE MODIFIEZ PAS la fiche
fournie avec l'appareil. Si cette dernière n'entre pas dans la prise, faites effectuer l'installation par un
technicien qualifié. Toute modification de la fiche entraînerait une annulation de la garantie.
Page 9 of 31
Loading ...
Loading ...
Loading ...