Loading ...
Loading ...
Loading ...
Problem solving guide
75
Problem Possible cause and remedy
A humming sound can
be heard after switching
on the appliance, during
operation and after
switching off the
appliance.
This is not a fault. It is made by water being pumped
through the system.
After moving house, the
appliance no longer
switches from the
heating-up phase to the
cooking phase.
Altitude affects the boiling point of water. If you move
house, the appliance will need to be reset for the new
altitude if this differs from the old one by more than
300m.
To adjust the boiling temperature, you need to
descale the steam oven (see “Cleaning and care –
Descaling the steam oven”).
During operation an
unusually large amount
of steam escapes or
steam escapes from
parts of the steam oven
where it does not
usually.
The door is not properly closed.
Close the door.
The door seal is not correctly fitted.
If necessary, press it in all the way round the door
to make sure it is fitted evenly.
The door seal is damaged, e.g. cracked.
Call Miele.
A whistling sound is
heard when the
appliance is switched
on again.
When the door is closed, the pressure has to
equalise, which can cause a whistling sound. This is
not a fault.
The symbol appears
in the display and an
audible tone may
sound.
The water container has not been pushed into the
appliance properly.
Remove the water container and push it back in so
that it connects.
There is not enough water in the water container. The
water level must be between the two marks.
Fill the water container
The symbol and a
number between and
appear.
The descaling time and
flash.
The appliance needs to be descaled.
Descale the steam oven (see “Cleaning and care –
Descaling the steam oven”).
Loading ...
Loading ...
Loading ...