Loading ...
Loading ...
Loading ...
9
HUMIDIFIER ACCESSORIES
MIST CHAMBER
1. To remove Mist Chamber, lift straight up off of Humidifier Base.
2. To attach the Mist Chamber, align the front arrow on the mist
chamber to the arrow on the base of the Humidifier.
NOTE: The humidifier will not operate when the Mist Chamber is
not properly in place. This is a safety feature which helps to avoid overheating.
MEDICINE CUP
The Medicine Cup allows the addition of medications recommended
for use with warm mist humidifiers only. DO NOT add any medication
or other additives directly to the water.
1. Place Medicine Cup on top of the Mist Channel.
2. BE CAREFUL not to overfill the Medicine Cup. Overfilling may cause
medicine to spill into Mist Channel. Medicine in the Mist Channel may affect the
operation of the humidifier.
HUMIDIFIER MAINTENANCE
IMPORTANT: Water left in the tank or base when not in use may result in buildup of
mineral deposits and bacteria which may inhibit the output efficiency as well as void the
warranty. If water remains in the Water Tank for more than a day or two, bacterial
growth is possible.
DAILY MAINTENANCE
1. Turn off, unplug from outlet and empty water from tank & base daily.
2. Allow tank & base to air dry.
3. Leave cap off the tank until ready for next use.
WEEKLY MAINTENANCE
1. Turn off, unplug from outlet and empty water from tank & base.
2. Fill the water tank halfway with warm water and add 2 tablespoons of white vinegar.
Shake vigorously and let sit for 30 min. Empty tank and rinse with plain water.
3. Rinse warm water through the mist outlet channel.
4. Remove the mist chamber and rinse with warm water to clean.
5. Fill base with vinegar until heating element is submerged. Let sit for 30 minutes.
Empty base & rinse with plain water.
6. Allow tank & base to air dry, and leave cap off the tank until next use.
NEVER IMMERSE HUMIDIFIER BASE IN WATER.
HOW TO CLEAN HEATING ELEMENT
1. Remove the mist chamber & fill base with vinegar until heating element is submerged
and let sit for 20 minutes.
2. Use a soft cloth or sponge to wipe out heating element to remove scale. DO NOT use
soap, detergents or abrasive cleaners.
3. Rinse heating element using clean, warm water and dry thoroughly.
NEVER IMMERSE HUMIDIFIER BASE IN WATER.
Loading ...
Loading ...
Loading ...