Loading ...
Loading ...
Loading ...
15
RANGE HOOD CARE
Cleaning
IMPORTANT: Clean the hood and grease lters frequently
according to the following instructions. Replace grease lter
before operating hood.
Exterior Surfaces
IMPORTANT: Do not use soap-lled scouring pads, abrasive
cleaners, cooktop polishing creme, steel wool, gritty washcloths
or paper towels.
To avoid damage to the stainless steel, do not use cleaners that
contain chlorine.
Cleaning Method:
■ Rub in direction of grain to avoid scratching or damaging the
surface.
■ For stainless steel models, Stainless Steel Cleaner and
polish Part Number 31462A (not included):
See the “Assistance or Service” section to order.
■ All-purpose cleaner:
Rinse with clean water and dry with soft, lint-free cloth.
■ Glass cleaner to remove ngerprints.
Metal Grease Filter
For vented installations:
1. Remove each lter by pulling the spring-release handle and
then pulling down the lter.
A. Spring-release handle
2. Wash metal lter as needed in dishwasher or hot detergent
solution.
3. Reinstall the lter by making sure the spring-release handles
are toward the front. Insert aluminum lter into upper track.
4. Push in spring-release handle.
5. Push up on metal lter and release handle to latch into place.
6. Repeat steps 1-5 for the other lter.
For non-vented (recirculating) installations:
The charcoal lter is not washable. It should last up to 6 months
with normal use. Replace with Charcoal Filter Kit. See the
“Assistance or Service” section for information on ordering.
Replacing an LED Lamp
The LED lights are replaceable by a service technician only. See
the “Warranty” for service contact information.
A
Loading ...
Loading ...
Loading ...