Loading ...
Loading ...
Loading ...
www.BISSELL.com
Operations: Cleaning Your Hard Floors
8
NOTE: Before you clean, thoroughly sweep or vacuum floor prior to cleaning
with the PowerFresh® Deluxe Steam Mop.
YOUR STEAM MOP IS DESIGNED TO CLEAN HARD FLOORING SUCH AS CERAMIC
TILE, LAMINATE, MARBLE, STONE AND SEALED HARDWOOD FLOORS. USE OF YOUR
STEAM MOP ON WAXED OR SOME UNWAXED FLOORS MAY RESULT IN A DIMINISHED
GLOSSINESS. THE STEAM MOP IS NOT FOR USE ON UNSEALED FLOORS. FOR BEST
RESULTS, TEST IN AN INCONSPICUOUS AREA AND CHECK THE CARE INSTRUCTIONS
FROM YOUR FLOORING MANUFACTURER.
To start cleaning your hard floors, turn the machine ON
by pressing the POWER button. Once the blinking Steam
Ready light turns solid, select the appropriate steam level.
Plug the machine into a
properly grounded outlet.
1
2
3
4
5
6
For overly challenging and stuck-on messes, step on
the release pedal located on the back of the machine
and lift up to use the SpotBoost™ Brush (see page 7).
Step on the back of the foot
to recline the body of the
machine to begin cleaning.
When finished cleaning, turn off the
machine by pressing the POWER
button and unplugging the unit.
For best results to
sanitize an area of
your floor, use the
microfiber cloth pads
and slowly and evenly
stroke your steam
mop back and forth
at least three times
over the area using
continuous steam.
Remove the pad after
use and wash.
x3
NOTE: When removing the SpotBoost™ Brush, make sure to lift it away from
your body as the bottom of the brush will release steam.
Loading ...
Loading ...
Loading ...