Loading ...
Loading ...
Loading ...
www.BISSELL.com
Problem Possible causes Remedies
Reduced
steam OR
no steam
Water tank empty
Refill tank
Steam level not selected Select steam level by pushing steam
level button
Scented disc tray not installed
properly
Push the scented disc tray all the
way into the unit until it’s flush
ON/OFF button not pressed Select by pushing the POWER
button once; Steam Ready light
illuminates
Streaking
Dirty mop pad Remove and wash pad per
instructions before further use
Use on waxed or oiled floor If you have used floor polishes or
wax on your floors, steam products
may decrease glossiness. Refer to
the wax or polish manufacturer. If
you don’t wax or polish your floors,
check the floor care instructions
from your flooring manufacturer.
Leaking
Mop pad is too wet Remove and replace with dry mop
pad
Steam level is too high Lower the steam level
Crack in unit or water tank Check to see if there are any cracks
on the unit or tank and check to
make sure the rubber gasket on
the tank is still attached and seated
properly in the unit
Knocking
Noise
First use or water tank is empty Fill water tank and knocking will
diminsh after a few seconds
Troubleshooting
WARNING
To reduce the risk of electric shock, turn power switch o and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
10
Loading ...
Loading ...