Loading ...
Loading ...
Loading ...
SAS900STK-0 A0
15
Press the ▲ or ▼ buttons until you reach the correct hour and AM/PM designation. (AM
begins at mid-night, and PM begins at noon).
Press the button again. The minutes display will begin to blink.
Press the ▲ or ▼ buttons until you reach the correct minutes.
Press the button again. The day of the week will begin to blink.
Press the ▲ or ▼ buttons until you reach the correct day of the week.
Press the button again. The display will now indicate the correct
time and day of the week.
3. Filter time
a) When in configuration the selections are in months, each month selections are equal to
30 days.
b) To review the remaining days hold the button for 3 second
c) To reset the filter days - hold the button for 3 second (to enter the filter program)
and then hold the ▲ and ▼ buttons. This resets the timer and starts counting the days
until the next filter change.
Troubleshooting----------------------------------------------------------------------------------------------------------------------
If a voltage spike or static discharge blanks out the display or causes erratic thermostat operation, you can
reset the thermostat by pressing the reset button (See Figure 1). If the thermostat has power, and has been
reset and still does not function correctly, contact your heating/cooling service contractor
Loading ...
Loading ...
Loading ...