Loading ...
Loading ...
Loading ...
Removing Collected Water
There are two ways to remove collected water:
1. Use the bucket
When the bucket is full, remove the bucket and empty it.
Do not move the unit at this time otherwise water may spill on the
floor.
Press sides of bucket gently to unclip the bucket from the unit.
Remove the bucket as shown in the photographs below and empty the
bucket.
Discard water from bucket. Water is not potable and cannot be used for
drinking
2.Continuous Drainage:
Water can be automatically be emptied into a floor drain by
attaching the dehumidifier to a water hose.
STEP１： Cut off the power;
STEP２：Unscrew the water cap counterclockwise and pull out the
rubber water plug；
STEP３：Connect the water pipe (Inner diameter * wall thickness *
length= 9mm * 2mm * 60cm) to the drainage outlet.
9
Loading ...
Loading ...
Loading ...