Loading ...
Loading ...
Loading ...
1
EN
1
• Fit the gasket seal (e2) on the blade unit (e1) (Fig.1).
• Place the assembly (e1+e2) on the base of the jug (e3). Lock it by rotating
the blade unit through a quarter turn in an anticlockwise direction (Fig.2).
• Introduce the ingredients to the assembled jug.
• Place the lid (e4) on the jug. Place the measuring cup (e5) in its slot on the lid.
• Place the blender jug assembly (E) on the motor unit (A). The blender jug
can be placed in two positions: jug handle to the right or the left of the
motor unit (Fig. 3).
• Once the blender jug is positioned correctly on the motor unit, plug in the
appliance and turn it on using the desired function.
• Speed selection: Turn the control knob (D) to choose the desired speed; the
speed increases gradually between min “ ” and max “ ”. You can change
this speed as required during preparation.
• “Pulse” function: Turn the control knob (D) to the “Pulse” position. Using a
succession of pulses gives finer control over the degree of blending for
precise preparations. In this position, the appliance starts directly on
maximum speed. It stops as soon as you release the knob.
• Function “ Smoothies”
This function is used to prepare smooth milkshakes and fruit cocktails. The
speed is pre-programmed for best results. To use this function, turn the
control knob to , and press the “Smoothies” button (B) to start the
appliance. To stop it, press the “Smoothies” button (B) again.
• Function “ Ice crush”
You can use this function to crush ice finely with pre-programmed operating
cycles and speed. To use this function, turn the control knob to , and
press the “Ice crush” button (C) to start the appliance. To stop it, press the
“Ice crush” button (C) again.
• Your appliance comes with a microprocessor that controls and analyses the
operating power. If the load becomes too high, your appliance will stop
automatically. To restart your appliance, turn the control knob to ,
unplug the appliance and remove some of the ingredients from the blender
jug. Allow your appliance to cool down to room temperature. Plug it in
again. You can then select the desired speed or function to complete your
preparation.
2
ASSEMBLING AND FITTING THE JUG
USING YOUR APPLIANCE FOR THE FIRST TIME
Loading ...
Loading ...
Loading ...