NC4IBS
Round Ice Ball Mold
Circle Ice Cube Ball Maker Freezer Tray
How to use your new ice ball mold:
• Before using your new ice tray be sure to wash
it thoroughly with soap water.
• Fill the bottom tray with water make sure to
leave 1cm unlled .
• Then set the bottom tray on an even surface
and press the top tray down into the bottom
tray until it is properly sealed.
• When full gently press down on the top of each mold to force out enough water to
give a slight air gap for the balls expansion so the ball forms properly without
cracking.
• Lay it at in the freezer for about 5 hours.
• Do not worry about the excess water in the tray, let it freeze with the mold.
After freezing follow the steps below:
Before removing the top tray break all the ice around balls in a twisting motion.
Don't worry about breaking the mold it is made out of silicon.
• Now remove the top lid and release ice spheres from the bottom tray.
lce balls are now ready for removal.
• Use how many you need and store the rest in zip bags in the freezer.
Tips to get clear ice:
• Always use distilled/ltered water.
• Boil the water rst then let it cool down so the microscopic bubbles trapped in the
water will escape.
www.NutriChefKitchen.com
Loading ...
