Loading ...
Loading ...
Loading ...
04 05
Take out the filter stand from the dust container and empty its dust into a
dust bin. After emptying, clean, wipe or air dry the dust container.
2.
Take the HEPA filter from the filter stand. Tape the filter bag and clean it
totally (Use clean water to clean the vacuum container, filter stand and HEPA
filter).
When the parts are dry, put the filter on the filter stand and reinstall it into
the vacuum container; And integrate the vacuum container with the main
body.
Press the vacuum container release button until the vacuum container is
installed in place.
3.
4.
5.
NOTE: Clean the vacuum container and filter bag with clean water, do
not use with soap or any other detergent. Otherwise, it will shorten the
lifespan of the filter bag. If the filter bag or the dust container is damaged
accidentally, please contact our service team immediately.
Use on the Light
Instructions on charging indicator light
Short press the Light button to turn on the light in front of the vacuum
cleaner. To turn off the light, you can short press the Light button again.
Charging state Solid Red light
Fully charged Solid Green light
Using state Solid Green light
Almost no power Red flashing
Run out of power No light
Washing The Dust Container
Cleaning vacuum container and filter bag
Ensure that the vacuum cleaner is in power-off state. Hold the handle and tilt
the opening at a mild angle to avoid dust from flowing out from the opening.
Press the dust container release button to take out the dust container
from the appliance.
1.
1
3
5
2
4
6
Loading ...
Loading ...
Loading ...