Loading ...
Loading ...
Loading ...
, The cleaning light starts to ash and the shaver is
automatically lowered into the cleaning uid.
, The cleaning light ashes throughout the cleaning
program, which takes a few minutes.
, During the rst phase of the cleaning program, the
shaver automatically switches on and off several times
and moves up and down.
, During the second phase of the cleaning program, the
shaver is placed in the drying position, indicated by the
ashing drying symbol. This phase takes approx. 2 hours.
The shaver stays in this position until the end of the
program.
, After the cleaning program, the charging indication
appears on the shaver display (see chapter ‘The display’).
Note: If you press the on/off button of the Jet Clean System
during the cleaning program, the program aborts. In this case,
the cleaning or drying light stops ashing and the holder moves
to the highest position.
Note: If you remove the adapter from the wall socket during the
cleaning program, the program aborts. The holder remains in its
current position. When you put the adapter back into the wall
socket, the holder moves to the highest position.
- When the cleaning uid drops below the minimum level,
the ‘cleaning chamber empty’ symbol starts to ash and
the holder returns to its starting position.
- If you use the Jet Clean System to clean your shaver every
day, you need to rell the cleaning chamber approx. every
15 days.
Cleaning the Jet Clean System
Clean the cleaning chamber every 15 days.
You can wipe the outside of the Jet Clean System with a
damp cloth.
1 Simultaneously press the release buttons on both sides
of the Jet Clean System (1). Then lift the Jet Clean
System off the cleaning chamber (2).
, The cleaning chamber remains behind.
ENGLISH50
Loading ...
Loading ...
Loading ...