Loading ...
Loading ...
Loading ...
22 English
reservoir in base. If using more than 6 oz. of water, some
will ow into the base. This will not hurt base but it is not
needed.
4. Position magnetic base cover back onto base. Set power
head on base and attach (without silicone heat element
cover attached). This will submerge heat element directly
into the mixture. Soak for 30 minutes to an hour or longer
depending on amount of build-up. You may scrub the
heat element with a soft bristle brush as particles begin
to loosen. Avoid hard brushes or steel wool as they can
damage the heat element.
5. Once clean, thoroughly rinse base, silicone parts and heat element with cool tap water to
ensure all residue is gone before using.
6. Avoid dumping water or the mixture into the two drain holes located on underside of
powerhead during cleaning.
NOTE: Undiluted white vinegar may also be used for cleaning the heat element, however,
citric acid is recommended.
For replacement packets (MD1-0037), call Vornado Consumer Service at 800-234-0604.
Loading ...
Loading ...
Loading ...