Loading ...
Loading ...
Loading ...
58
The picture is too dark.
•
You are shooting a subject with a light source
behind the subject.
t Adjust the exposure (page 43).
t Adjust the brightness of the LCD screen (page
35).
The flash does not work.
•
The flash is set to .
t Set the flash to auto (no indicator), or
(page 19).
•
PROGRAM AE is set to the Twilight, Twilight
plus, or Panfocus mode.
t Cancel the mode (page 42) or set the flash to
.
•
The MODE selector is set to MOVIE (DSC-S50
only).
t Set it to STILL.
The date and time are
recorded incorrectly.
•
The date and time are not set correctly.
t Set the correct date and time (page 13).
Vertical streaks appear
when you are shooting a
very bright subject.
•
The smear phenomenon is happening.
t This is not a malfunction.
The battery life is short.
•
You are recording/playing back images under
extremely cold temperatures.
•
The battery pack is not charged enough.
t Charge the battery pack fully.
•
The battery pack is dead.
t Replace the battery pack with a new one.
The battery remaining
indicator is incorrect.
•
You have used the camera for a long time in an
extremely hot or an extremely cold location.
•
The battery pack is dead.
t Replace the battery pack with a new one (page
8).
•
The battery pack is discharged.
t Install a charged battery pack (pages 8, 9).
Sufficient battery
remaining indicator is
displayed but the power
runs out soon.
t Fully charge the battery pack (page 9).
The zoom does not work.
•
PROGRAM AE is set to the Panfocus mode.
t Cancel the Panfocus mode (page 42).
Digital zoom does not
function.
•
You cannot use digital zoom to record moving
pictures.
Symptom Cause and/or Solution
Loading ...
Loading ...
Loading ...