Loading ...
Loading ...
Loading ...
8
www.BISSELL.com
Clean the Pre-Motor Filter
1
2
3
4
Return tank back
on vacuum and
press firmly until
you hear a “click”.
Remove carbon
and foam filter
from lid. Hand
wash in warm
water and
rinse well; mild
detergent may be
used if desired.
click
Press the
tank release
button and
pull out to
remove Dirt
Tank.
Allow filter to air
dry completely
before placing
back into the
tank lid. The
carbon filter
should be on top
of the foam filter.
1
2
3
Remove the filter by
grasping the sides of
the filter and pulling
out from the vacuum.
Clean or replace filter
as necessary.
Recline
vacuum and
lay back for
easier filter
access.
Located on the front of
the vacuum above the
foot height adjustment
knob, remove the filter
door by pushing down
the latch and pulling
the door out.
Replace filter in
unit and replace
filter door by lining
up the sides of the
door and sliding
into place until you
hear a “click”.
WARNING
» To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
» Do not operate vacuum with damp or wet filters or without all filters in place.
Maintain the Post-Motor Filter
NOTE: The pleated post-motor filter may NOT be washed with water or detergent. If dust
and/or debris accumulates on filter, gently tap the filter on the side of a garbage container.
4
NOTE: Replace filter every 3 to 6 months. Search BISSELL.com for Style 1526.
NOTE: Replace filter every 3 to 6 months. Search BISSELL.com for Style 1214.
Loading ...
Loading ...
Loading ...