Loading ...
Loading ...
Loading ...
40
E
• When installing, removing or moving the monitor, ensure
that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or
designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall
or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before
starting installation.
This monitor and bracket must be installed on a wall which
can endure at least 4 times or more the weight of the
monitor. Install by the most suitable method for the material
and the structure.
• To attach a VESA-compliant mounting bracket, use M6
screws that are 5/16 inch (8 mm) to 3/8 inch (10 mm)
longer than the thickness of the mounting bracket.
• Do not use an impact driver.
• When moving the monitor, be sure to hold it with the unit
bottom and the side of unit. Do not hold the LCD panel or
corners. This may cause product damage, failure, or injury.
• Do not use any screw holes other than VESA holes for
installation.
Mounting Precautions
(For SHARP dealers and service engineers)
n
Removing the stand
Caution
• The stand is only for use with the monitor.
Do not use with any other devices.
• The stand is heavy. Take care not to let it fall.
1. Spread a thick, soft cloth (blanket, etc.) that will prevent
damage to the LCD panel on a stable at surface where
the entire monitor can be placed, and place the monitor
with the LCD panel face down on the cloth.
2. Remove the screws(x4) that fasten the stand, and
remove the stand.
n
Toppling prevention
Caution
• To reduce the risk of injury and damage caused by the
product toppling or falling in an earthquake or similar
situation, take measures to prevent toppling and falling.
• If the wall or platform on which the monitor is installed is
not sufciently strong, the effectiveness of the toppling/
falling prevention measures will be severely compromised.
Reinforce the wall or platform as needed.
The toppling/falling prevention measures are intended to
reduce the risk of injury and damage in an earthquake,
however, the effectiveness of the measures is not
guaranteed in all earthquakes.
• Before implementing the toppling prevention measures,
complete all connections.
Secure to wall or post
1.
Attach a commercially available eye bolt (a bolt shaped to
allow attachment of a string or cord) to the wall or post.
Verify that the eye bolt is attached rmly and does not come out.
Commercially available
eye bolt
(bolt shaped to allow
attachment of a string
or cord)
• Top of monitor
2. Attach the supplied anti-toppling clamps (x2) to the stand
pedestal with the screws (M4 x 10) (x2).
• Back of monitor
3. Run a commercially available cord of sufcient strength
through the anti-toppling clamps and the eye of an eye
bolt attached to the wall or a post to secure the monitor.
• Top of monitor
Commercially
available cord
• Back of monitor
Loading ...