Loading ...
Loading ...
Loading ...
En 49
Error messages
If any error message is displayed during the measurement, resolve the problem and perform
YPAO again.
Error message Remedy
ERROR 1
Front speakers are not
detected.
Follow the on-screen instructions to exit YPAO, turn off the unit, and
then check the speaker connections.
ERROR 2
One of the surround speakers
cannot be detected.
ERROR 3
One of the front presence
speakers cannot be detected.
ERROR 4
One of the surround back
speakers cannot be detected.
ERROR 5
The noise is too loud.
Keep the room quiet and follow the on-screen instructions to start the
measurement again. If you select “Proceed”, YPAO takes the
measurement again and ignores any noise detected.
ERROR 6
Surround back speakers are
connected, but no surround
speakers are connected.
Surround speakers need to be connected in order to use surround back
speakers. Follow the on-screen instructions to exit YPAO, turn off the
unit, and then reconnect the speakers.
ERROR 7
The YPAO microphone has
been removed.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow
the on-screen instructions to start the measurement again.
ERROR 8
The YPAO microphone cannot
detect test tones.
Connect the YPAO microphone to the YPAO MIC jack firmly and follow
the on-screen instructions to start the measurement again. If this error
occurs repeatedly, contact the nearest authorized Yamaha dealer or
service center.
ERROR 9
Canceled by user operation
Follow the on-screen instructions to start the measurement again. To
cancel the measurement, select “Quit”.
ERROR 10
An internal error has occurred.
Follow the on-screen instructions to exit YPAO, turn off and on the unit.
If this error occurs repeatedly, contact the nearest authorized Yamaha
dealer or service center.
Loading ...
Loading ...
Loading ...