User Manual - Page 20

so easily. Any changes you make then allow you to

create a Custom setting. If you are likely to use these

same settings again in the future then you can Save

the Preset for future use.

There are two main things that can affect the quality of your print; one is the layer height (measured in microns)

and the other is print speed (measured in millimetres per second). Using these sliders here you can adjust both

settings. The quality ranges from 50 to 350 microns (0.05mm to 0.35mm) with a default of 200 (0.2mm). The speed

ranges from 20mm/s to 100mm/s with a default of 50mm/s. Note: the smaller the micron number, the ner the print

detail (as you are printing more layers) and the lower the speed, the better quality of print (as there is less vibration

whilst printing).