User Manual - Page 7

For KD-55AG9.

Loading ...
Loading ...
Loading ...
7
GB
D:\_SONY TV\SP\SY19_SP_EU_RG_131\4748699131\01GB-KD77AG96EU\040ADD.fm masterpage: Right
KD-77AG9 / 65AG9 / 55AG9
4-748-699-13(1)
GB
CENTER SPEAKER IN
To use your TV speakers as the centre
speaker, connect the output of your AV
receiver to the CENTER SPEAKER IN on
your TV.
Before connecting cables, disconnect the
mains lead of both TV and AV receiver.
Make sure the [Speakers] is set to [Audio
system].
To prevent hiss when not connecting the
CENTER SPEAKER IN to an AV receiver,
disable [TV centre speaker mode]. For
details, refer to the Help Guide.
CAM (Conditional Access Module)
Provides access to pay TV services. For
details, refer to the instruction manual
supplied with your CAM.
Do not insert the smart card directly into
the TV CAM slot. It must be fitted into the
Conditional Access Module provided by
your authorised dealer.
CAM is not supported in some countries/
areas. Check with your authorised dealer.
A CAM message may appear when you
switch to a digital programme after using
the Internet video.
/ AV IN
For a composite connection, use an
Analogue Extension Cable (not supplied).
 (Headphone)
Supports 3-pole stereo mini jack only.
You cannot output sound from both the
headphone and the TV speakers at the
same time.
USB 1/2, USB 3 (HDD REC)*
2
Connecting a large USB device may
interfere with other connected devices
beside it.
When connecting a large USB device,
connect to the USB 1 port.
Connect a USB HDD device to the USB 3
port (blue).
HDMI IN 1/2/3/4
HDMI interface can transfer the digital
video and audio on a single cable.
To enjoy high quality 4K 50p/60p
contents, connect a Premium High Speed
HDMI cable and set the [HDMI signal
format] to [Enhanced format].
Do this setting individually for each
connected HDMI IN terminal. For details of
supported formats, refer to the
“Specifications“ in this manual (page 12-
13).
HDMI IN 3 eARC/ARC (Enhanced Audio
Return Channel/Audio Return Channel)
Connect your audio system to the
HDMI IN 3 to route TV audio to your audio
system. An audio system that supports
HDMI eARC/ARC can send video to the TV,
and receive audio from the TV via the
same HDMI cable. If your audio system
does not support HDMI eARC/ARC, an
additional connection with DIGITAL AUDIO
OUT (OPTICAL) is necessary.
Use the HDMI cable with Ethernet to
connect audio system with eARC.
3.5 mm
1234
1: L
2: Video
3: Ground
4: R
< 12 mm
< 21 mm
Loading ...
Loading ...
Loading ...