Loading ...
Loading ...
Loading ...
36
FEATURES AND CONTROLS
All Wheel Drive (4X4) System
4X4 Mode
Move the momentary switch to the right to
engage 4X4. 4X4 will engage when engine
speed slows to below 3100 RPM. The
gauge will display “AWD”.
There is no limit to the length of time the
vehicle may remain in 4X4. The vehicle
automatically engages 4X4 when operating in reverse if the switch is set
to the 4X4 position.
Once enabled, 4X4 remains enabled until the switch is turned off. If the
switch is turned off while the demand drive unit is moving, it will not
disengage until the rear wheels regain traction.
When in 4X4, the demand drive unit will automatically engage any time
the rear wheels lose traction. When the rear wheels regain traction, the
demand drive unit will automatically disengage.
4WDC Mode (if equipped)
Move the momentary switch to the right,
past the 4X4 setting, to engage 4WDC (if
equipped). The gauge will display “ADC”.
When the switch is on 4WDC, the ADC
system allows engine braking to all four
wheels when the vehicle descends a hill or
incline. Always move the 4X4 switch to 4WDC before ascending or
descending a hill. See page 37.
2X4 Mode
Move the momentary switch to the far left
to operate in two-wheel drive (2X4). 4X4
will disengage when engine speed slows to
below 3100 RPM. The gauge will display
“2X4”.
RPM
FE
88
:
88
RPM
FE
88
:
88
RPM
FE
88
:
88
Loading ...
Loading ...
Loading ...