Loading ...
Loading ...
Loading ...
E-12
Listening to Bluetooth enabled devices (for HT-SB30) (continued)
Listening to the sound■
Check that:
The source device Bluetooth functionality is ON.
Pairing of this sound bar and the source device
is completed.
Sound bar is in connected mode (pairing indica-
tor (BLUE) lights up.)
Any device connected to the AUDIO IN socket
is turned off.
Press the ON/STAND-BY button to turn the
power on.
1
Press the INPUT button to select Bluetooth
function.
2
Start the Bluetooth connection from the
Bluetooth stereo audio source device.
3
Press play button.
Notes:
If the source device has an extra bass function
or equalizer function, set them to off. If these
functions are on, sound may be distorted.
4
Notes:
You need to make the Bluetooth connection
again if:
- the source device is not turned on, or its Blue-
tooth functionality is off or is in sleep mode.
During Bluetooth function, ff both the Bluetooth
connected device and the one connected to the
AUDIO IN are played simultaneously, only the
Bluetooth sound can be heard.
●
●
●
●
●
●
To nish listening■
Perform any of the followings.
- Disconnect the Bluetooth connection on the audio
source device.
Refer the operating manual supplied with the
device.
- Turn off the Bluetooth stereo audio source
device.
- Turn off this sound bar.
Note:
The volume of this sound bar may not be controlled
as intended depending on the device.
Bluetooth operation buttons
(remote control only)
Press the button to play or pause.
Press the button to skip up.
Press the button to skip down.
Loading ...
Loading ...
Loading ...