Loading ...
Loading ...
Loading ...
Tire Puncture u Removing Wheels
86
Troubleshooting
1.
Install the side collar into the wheel hub.
2.
Position the wheel between the swingarm
and the final drive gear case.
u Be sure the splines on the wheel hub fit
into the final drive gear case.
3.
Install the rear brake bracket and rear
brake bracket bolt.
u
Avoid scratching the brake pads, carefully
fit the brake disc between the pads.
4.
Push the rear axle shaft from the left side,
through the wheel hub and rear brake
bracket.
5.
Install the rear axle nut and washer.
6.
Tighten the rear brake bracket bolt.
7.
Install the axle holding bolt and washer.
8.
After installing the wheel, apply the brake
pedal several times, then check if the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
9.
Remove the protective tape or cloth.
Muffler Installation
Before installing the muffler, replace the
muffler gasket with a new gasket.
1.
Tighten the exhaust pipe joint nuts.
2.
Tighten the muffler bracket bolt A, B and
nuts.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Torque:
94 lbf·ft (127 N·m, 13.0 kgf·m).
Torque: 51 lbf·ft (69 N·m, 7.0 kgf·m).
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m).
Torque: 17 lbf·ft (23 N·m, 2.3 kgf·m).
Torque: 20 lbf·ft (27 N·m, 2.8 kgf·m).
Loading ...
Loading ...
Loading ...