ARC-1030WN User Manual

Loading ...

OPERATION INSTRUCTIONS

TIMER (DELAYED SWITCH ON / OFF) FUNCTION

This funcon mode enables a delayed switch ON or delayed switch OFF of the air condioner. The me (hours) delay can be set,

enabled and disabled.

SETTING SWITCH OFF TIMER

With the air condioner operang in any funcon mode, press the TIMER buon. The TIMER OFF light will come on. Then set the

desired me delay OFF hours by pressing the UP and DOWN buons. The me increments are at 0.5 hour to up to 10 hours, fol-

lowed by 1 hour increment up to 24 hours. When the delay me set has elapsed, the air condioner switches o. To cancel the

delayed switch o funcon, turn o the air condioner or adjust the me set-ng to 0.0.

SETTING DELAYED SWITCH ON TIMER

With the air condioner is o, press the TIMER buon. The TIMER ON light will come on. Then set the desired me delay ON hours

by pressing the UP and DOW N buons. The me increments are at 0.5 hour to up to 10 hours, fol-lowed by 1 hour increment up

to 24 hours. When the delay me set has elapsed, the air condioner switches on. To cancel the delayed switch on funcon, turn

on the air condioner or adjust the me seng to 0.0.

I SENSE FUNCTION

The remote control serves as a remote thermostat allowing for the precise and comfortable temperature control. With this tech-

nology, an ecient temperature sensor is integrated in the remote control. To acvate the I SENSE funcon, press I SENSE buon

on the remote control. Once this funcon is acvated, the remote control will send the temperature signal to the air condioner

every 3 minutes interval unl you press the I SENSE buon again. The air condioner will automacally cancel the I SENSE feature

if it does not receive the signal during any 7 minutes interval.

NOTE: The I SENSE feature is not available in DRY and FAN mode. Shiing the operang mode or turning o the unit will cancel the

Follow Me feature automacally. The remote control needs to be within 26 feet reach of the indoor unit for the I SENSE mode to

work appropriately.

SLEEP MODE

In this mode, the air condioner gradually increases the set temperature in cooling mode, decreases the noise level and conserves

energy. In Economy and cooling mode, the set temperature is increased by 1°C/ 2°F in the rst 30 minutes. The temperature will

then increase by another 1°C/ 2°F aer an addional 30 minutes. This new temperature will remain the same for 7 hours. To ac-

vate this funcon mode, press the SLEEP buon unl the SLEEP indicator light comes on.

NOTE: This feature is not available in FAN or DRY mode.

AUTO RESTART

In the event of a power outage, the air condioner restarts at the previously set funcon mode and sengs when power is re-

stored.

CONTROLLING THE AIR FLOW DIRECTION

The louvers can be controlled to Auto-Swing or in a xed direcon. To control the air ow direcon by Auto-Swing, press the

SWING buon. To set the louvers in a xed angle or direcon, press SWING buon while on Auto-Swing mode when desired angle

is chosen.

NOISE LEVEL

Portable air condioners may make sounds that are not familiar to you. The sounds listed below are normal. Noise reecng o

hard surfaces such as a oor or wall can make the sounds seem louder than they actually are.

• The compressor may make a pulsang or high-pitched sound

• Water running from the evaporator to the water tank may make a splashing sound

• Refrigerant owing may make a gurgling sound

• Fan sound may come from front and back air vents

COMPRESSOR LOCK OUT

This portable air condioner is opmized to operate in an ambient temperature of 64°F – 90°F. The compressor circuit has an auto-

mac 3 minute me delayed start if the unit is turned o and on quickly. This prevents over-heang of the compressor and possi-

ble circuit breaker tripping.

Page 14

Loading ...

User Manual - Page 14