Loading ...
Loading ...
Loading ...
5
6
11
Remove cap from end of Propane Cylinder(sold separately). Cap should be kept on cylinder when not in use to prevent
dirt and debris from entering Regulator/Valve. Check end of cylinder attachment for dirt and debris. Clean out if necessary.
Insert threaded end of Propane Cylinder into Regulator/Valve and hand-tighten. DO NOT USE TOOLS! Over tightening
can damage threads on Regulator/Valve.
Perform a leak test.
Propane Cylinder
(Not Included)
Burner
Regulator/Valve
Regulator/Valve
Locked in position
Before assembly, inspect Regulator/Valve for damage, dirt or debris accumulation. Clean out if present.
With knob pointing down, insert Regulator/Valve into end of Burner. Notch in Regulator/Valve MUST engage dimple
on end of burner.
Once Regulator/Valve has completely engaged Burner, turn Regulator/Valve clockwise to lock in position with knob
pointing up.
Note: Remove Regulator/Valve
to fold up or unfold this leg
Loading ...
Loading ...
Loading ...