Loading ...
Loading ...
Loading ...
23
Automatic ice maker
Before turning on your automatic ice maker, the water
filter must be installed (refertoyour installation guide)
and flushed to remove any impurities or trappedair
inthe filter system.
1
To activate your automatic ice maker, press once.
Thelight above illuminates to indicate the ice maker
is on.
2
Press the , and together for 4seconds then
closethe doors. The ice tray will empty the water into
the bin below. The ice tray will only empty after the
doors are closed.
3
Repeat step
2
to remove dust in the ice tray collected
during manufacture and transport.
4
Empty the water, dry the bin and return it correctly.
5
Once your ice maker is turned on the first bin of ice may be discolored, this is not
harmful and normal during the flushing process. Discard the first full bin of ice made.
Your ice maker is now ready for use.
For Ice & Water models, the water filter will reach optimum performance aftertwo
to three full bins of ice.
For Ice only models, the water filter will reach optimum performance after
fourtofive full binsof ice.
Turn the ice maker off if:
There is no water supply for several hours.
You are removing the ice storage bin for a period of time.
You are going on holiday/vacation.
Collecting ice
Your automatic ice maker produces approximately eight cubes of ice every 3 – 4 hours,
depending on the freezer compartment temperature and the number of times the door
is opened.
The ice cube tray is filled with filtered water.
Frozen ice cubes are dispensed from the ice tray and into the ice storage bin below.
Ice making will continue until the storage bin is full, and only resumes once you start
touse the stored ice.
When the ‘Ice Boost’ feature is activated, ice production will increase up to 30%
fromstandard ice making. This function automatically deactivates after 24 hours.
If large amounts of ice are needed, remove the ice storage bin and allow ice to fill
thetop freezer bin.
For maximum ice storage, level the stored cubes with the ice scoop.
If ice is not used often, the quality of ice cubes will deteriorate. Empty the ice storage
bin periodically and wash in lukewarm water. Dry thoroughly and place back into the
correct position.
IMPORTANT!
Avoid contact with the moving parts of the ice maker ejector mechanism, and do not
place your fingers on the automatic ice making mechanism while the refrigerator is
inoperation.
OPERATING INSTRUCTIONS
Turning ice maker on
Loading ...
Loading ...
Loading ...