Loading ...
Loading ...
Loading ...
22
OPERATING INSTRUCTIONS
Before you start using the Ice & Water or automatic ice
Ensure your ice and water system is correctly installed by following the installation
guidesupplied with your appliance.
Check your refrigerator is switched on.
Allow at least 2hours for your refrigerator to cool before use.
Complete all the flushing steps detailed in this user guide to ensure optimum
performance of your water filter.
Water dispenser (Ice & Water model only)
Flushing out the water filtration system
Press the water dispenser pad to dispense 1 gal (4L) of water.
– There may be carbon residue dispensed together
with water. This is not harmful, and normal during
flushing process.
Wait for 4 minutes before dispensing again.
Dispense another 1 gal (4L) of water. Your water dispenser
is now ready for use.
Water will continue to drip from the dispenser for a few
more days after installation as the remaining trapped air
is released from the system.
Dispensing
Your water dispenser is designed for one-handed operation.
To dispense water, gently press the dispensing pad with a glass or container.
To stop the flow of water, simply pull your glass away from the dispensing pad.
Pressing hard against the dispensing pad will not increase the flow or dispense
morewater.
IMPORTANT!
To avoid damage to property or personal injury do not put hands,
fingers or objects up the dispenser opening.
Dispenser lock
The dispenser lock is located on the external display
and can be activated to prevent water from being dispensed.
This is useful when you are cleaning the external display or
when there are small children around.
To activate dispenser lock, press for 4seconds.
The light above will illuminate.
When the dispenser pad is pressed, several beeps will sound
to alert the user that water cannot be dispensed.
To deactivate dispenser lock and dispense water, press
for 4seconds. The LED above will not illuminate.
Water dispenser
Dispenser lock
Loading ...
Loading ...
Loading ...