Loading ...
Loading ...
Loading ...
EN
©2020 Hestan Commercial Corporation
11
DOOR INFORMATION
(continued)
OVERLAY INSTALLATIONOVERLAY INSTALLATION
Before beginning installation, check all components for proper fit and finish.
NOTE: For more detailed installation information, please request or download document 028374
mentioned on the previous page.
For best performance and functionality, the overlay panels should be 3/4” [19 mm] thick. The weight
of the overlays should not exceed 20 lbs [9 kg] for solid doors, 10 lbs [4.5 kg] for glass doors, or 10 lbs
[4.5 kg] for drawer models.
1. With the unit secured in position, open the door, CAREFULLY remove the door gasket (it can
tear), and make sure panel pre-drilled holes align with door frame holes.
2. Loosely attach four corners of overlay panel to the door using #10 x 3/4” wood screws, installed
through the door frame from the rear.
3. Check the overall fit of the overlay panel, position, and function. Make minor adjustments as
necessary. When panel is properly aligned, tighten mounting screws securely. Install the rest of
the mounting screws and tighten securely.
Do not overtighten overlay panel attachment screws, as this may damage the factory supplied door
frame.
WINE RACK TRIM (OPTIONAL)WINE RACK TRIM (OPTIONAL)
All wine reserve racks come with sleek stainless steel fronts, which can be removed and replaced with
other wood to match your cabinetry. See Figure 6 for wine rack face details.
NOTE: The unfinished faces should be finished and sealed. In many cases, stains and / or finishes
have odors that may be objectionable in an enclosed area. Do not stain or finish wood faces while
installed on unit. To remove the front wood face from the wine shelf, simply pull out the wine shelf
and remove the fasteners, finish as desired.
1
2
5
8
BREAK ALL
OUTSIDE EDGES
"
"
1-
17
32
"
5
8
"
8-
17
32
"
7-
1
4
"
8
"
8-
17
32
"
5
16
" DEEP
17
32
"
18-
5
16
"
1-
1
2
"
Figure 6. Wine Rack Trim
Loading ...
Loading ...
Loading ...