Loading ...
Loading ...
Loading ...
10 EN
3 Get started
Always follow the instructions in this chapter in
sequence.
Install remote control battery
Caution
Risk of explosion! Keep batteries away from heat,
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The battery contains chemical substances, so it should
be disposed of properly.
Keep children away from the battery.
Remove the protective tab to activate the
battery.
To replace the battery, refer to the
illustration.
C
Connect power
Caution
Risk of product damage! Ensure that the power voltage
corresponds to the voltage printed on the back or
underside of the clock radio.
Risk of electric shock! When you unplug the AC adapter,
cord.
Warning
To reduce the risk of fire or electric shock, do not
expose this clock radio to rain or moisture.
Connect the power adapter to the wall
socket. D
Set clock
1
In standby mode, press and hold SET TIME
for two seconds to activate clock setting
mode.
»
The hour and minute digits begin to
blink.
2
Press / and / repeatedly to set
the hour and minute.
3
Press SET TIME
»
[12H] or [24H] begins to blink.
4
Repeat Steps 2-3 to select 12/24 hour
format.
»
The set time is displayed.
Note
When iPod/iPhone is connected, the clock radio
synchronizes time from the iPod/iPhone automatically.
Turn on
Press .
»
The clock radio switches to the last
selected source.
Tip
To select a source, press SOURCE repeatedly or the
source selection buttons on the remote control.
Switch to standby mode
Press
again to switch the clock radio to
standby mode.
»
display panel.
Loading ...
Loading ...
Loading ...