Loading ...
Loading ...
Loading ...
13
English
EN
6 Other features
Set alarm timer
Set alarm
In standby mode, you can set two alarms to ring
at different time.
Note
Make sure that you have set the clock correctly.
1
Press and hold AL1/AL2 for two seconds to
activate alarm setting mode.
»
The hour and minute digits begin to
blink.
2
Press / and / repeatedly to set
the hour and minute.
3
Press AL1/AL2
Select alarm source
Note
For alarm sound, you can select buzzer, your last
listened radio chanel, or latest played audio in your
iPod/iPhone.
Adjust AL1/AL2 RADIO·BUZZ·DOCK control
to select alarm source for both alarms.
Tip
When alarm time comes, the selected radio, buzzer, or
iPod/iPhone turns on.
If iPhone is selected as alarm source, while no iPod/
iPhone is connected, the clock radio switches to buzzer
source instead.
Activate/deactivate alarm timer
1
Press AL1/AL2 to view alarm settings.
2
Press AL1/AL2 again to activate or deactivate
the alarm timer.
»
The alarm icon appears if alarm timer
is on and disappears if it is off.
To stop the ringing alarm, press the
corresponding AL1/AL2.
The alarm repeats ringing for the next
day.
Snooze alarm
When alarm sounds, press SNOOZE.
»
The alarm snoozes and repeats ringing
nine minutes later.
Set sleep timer
This clock radio can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep timer
»
When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF]
Play audio from an external device
You can listen to audio from an external device
through this clock radio.
1
Connect the MP3 link cable to:
the MP3 LINK socket.
the headphone socket of an external
device.
2
Press MP3 LINK to select MP3 link source.
3
Start to play the external device (see the
Adjust display brightness
Press BRIGHTNESS repeatedly to select
different brightness levels.
15 30 60 90 120
OFF
Loading ...
Loading ...
Loading ...