Loading ...
Loading ...
Loading ...
Others
GB
52
Troubleshooting
Indicators
The LAMP/COVER or TEMP/FAN indicator on the
control panel lights up or flashes if there is any trouble
with your projector.
Warning messages
Use the list below to check the meaning of the
messages displayed on the screen.
Caution messages
Use the list below to check the meaning of the
messages displayed on the screen.
Caution regarding messages while
using the “Memory Stick”
Use the list below to check the meaning of the
messages.
A still picture in the
“Memory Stick”
cannot be rotated or
deleted.
c Release the lock for the write-
protect tab on the “Memory
Stick”. (1 page 32)
c Release the protect in the index
screen. (1 page 42)
The “Memory Stick”
cannot be formatted.
c Release the lock for the write-
protect tab on the “Memory
Stick”. (1 page 32)
c The “Memory stick” is broken.
Use another “Memory Stick”.
The thumbnails are not
displayed.
c The pictures are the JPEG
format but not DCF-compatible.
Use the DCF-compatible
pictures.
The still pictures files
in the JPEG format
stored in a “Memory
Stick” cannot be
displayed.
c Set “Filter” in the “Option”
menu to “Still” or “Off.”
The movie picture files
in the MPEG1 format
stored in a “Memory
Stick” cannot be
displayed.
c Set “Filter” in the “Option”
menu to “Movie” or “Off.”
LAMP/COVER
flashes.
c Attach the lamp cover or the air filter
cover securely. (1 pages 53 and 54)
LAMP/COVER
lights up.
c The lamp has reached the end of its
life. Replace the lamp. (1 pages 53)
c The lamp becomes a high temperature.
Wait for one minute to cool down the
lamp and turn on the power again. (1
page 22)
TEMP/FAN
flashes.
c The fan is broken. Consult with
qualified Sony personnel.
TEMP/FAN
lights up.
c The internal temperature is unusually
high. Check to see if nothing is
blocking the ventilation holes.
LAMP/COVER
and TEMP/FAN
light up.
c The electrical system breaks down.
Consult with qualified Sony
personnel.
LAMP/
COVER
TEMP/
FAN
POWER
SAVING
ON/
STANDBY
LAMP/COVER Indicator
TEMP/FAN Indicator
High temp.!
Lamp off in 1
min.
c Turn off the power.
c Check to see if nothing is blocking the
ventilation holes.
Frequency is
out of range!
c Input a signal that is within the
acceptable range of the frequency.
c Set the output signal on an external
monitor of the connected computer to
SVGA.
Please check
Input-A Signal
Sel.
c Set “Input-A Signal Sel.” in the SET
SETTING menu to “Computer”
when RGB signal is input from the
computer. (1 page 29)
Please check
Digital Signal
Sel.
c Set “Digital Signal Sel.” in the SET
SETTING menu to “Computer”
when RGB signal is input from the
computer.(1 page 29)
Note
Before you change the “Digital Signal Sel.”
setting, disconnect the DVI cable and turn off the
digital tuner, etc.
Please replace
the LAMP.
c It is time to replace the lamp. Replace
the lamp. (1 page 53)
Please replace
the filter.
c It is time to replace the air filter. Replace
the air filter. (1 page 54)
NO INPUT c No signal is input. Check connections.
(1 page 13)
Not applicable! c Press the appropriate button.
No Memory
Stick
c Insert the “Memory Stick” into the
“Memory Stick” slot correctly.
No file c No picture files are contained in the
currently selected folder.
No movie file c No movie picture files are contained in
the currently selected folder although
“Filter” is set to “Movie” in the
“Option” menu.
No still file c No still picture files are contained in the
currently selected folder although
“Filter” is set to “Still” in the “Option”
menu.
Loading ...
Loading ...
Loading ...