Loading ...
Loading ...
Loading ...
Use
18
Setting the time for AUTO START mode
Use this setting to program the appliance to
switch on automatically to prepare the drip
coffee at a time selected by the user.
To set the auto start time, proceed as
follows:
1. Check that the displayed time is correct.
If not, set the current time as described in
the paragraph “3.2 First use”.
2. Hold down the button for 3 seconds
to set the time for the AUTO START
mode: the LED of the button and the
time display (HH:MM) start to flash.
3. Use the lever, moving it up (+) or down (-)
to set the desired time.
4. Move the lever to the central position
and press (OK) to confirm.
5. Once the settings are saved, the
programmed AUTO START time will be
automatically saved and maintained until
a new setting is selected to replace it.
AUTO START mode
1. Press the AUTO START button to
activate the AUTO START mode: the LED
of the AUTO START button will light
up and the hours and minutes set for the
coffee preparation will flash on the
display for a few seconds. Then the
current time will be displayed.
2. Press the AROMA button to select
the desired coffee intensity in AUTO
START mode. If necessary, depending
on the quantity to be dispensed in AUTO
START mode, press the 4 CUPS
function button to store the function.
3. The appliance will remain in AUTO
START mode until the programmed time.
The brewing cycle starts automatically.
4. Press the AUTO START button at
any time to exit the AUTO START mode:
the appliance will beep and return to
CLOCK mode.
Loading ...
Loading ...
Loading ...