Loading ...
Loading ...
Loading ...
Use
12
3.2 First use
1. Insert the plug into an electrical socket.
2. Press the ON /OFF button. The
display shows the flashing symbols.
3. Set the time using the lever (1).
4. Set the hour value by moving the lever
up (+) to increase the value or down (-)
to decrease the value.
5. Confirm the value by placing the lever in
the central position and pressing it (OK).
6. Set the minute value following the same
procedure.
7. After confirming the minute setting, the
appliance activates the CLOCK mode.
3.3 How to access the settings menu
Some settings can be customized:
• SE01: Sets the clock format
• SE02: Sets how hard/soft the water is
• SE03: Activates/deactivates audible
signals
Open the settings menu by pressing and
holding buttons and at the same
time for 3 seconds.
To exit the settings menu, press any button.
The first time the appliance is
powered on, by default the clock
will be in the 12-hour format with
AM/PM indicated.
To change the time format, please
refer to the section “ Clock format
settings menu”.
Loading ...
Loading ...
Loading ...