Loading ...
Loading ...
Loading ...
6
Introduction
This manual is designed to provide product, performance
and application information to our customers and their
architects and engineers for use in selection and design
of a zonal comfort control system utilizing GE Zoneline
®
Packaged Terminal Air Conditioners (PTAC) and Packaged
Terminal Heat Pumps (PTHP). GE Zoneline PTACs and PTHPs
are self-contained units designed for through-the-wall
installations in hotels, motels, apartments, hospitals,
nursing homes, add-on rooms and many other installations.
Zonelines provide individual room or zone control in both
cooling and heating operation. There is a model for practically
every application, ranging in cooling capacity from 7,100 to
14,700 BTUH and heating capacity from 6,400 to 13,400 BTUH
in heat pump operation. See pages 33 and 55 for resistance
heaters available.
Zoneline offers a two-tier lineup: the Deluxe Line and the
Premium Line. The Deluxe Line consists of the 2800 Series
with electric resistance heat, the 2800 Series Dry Air 25 Models
with enhanced dehumidification for hot and humid climates
and the 3800 Series heat pump. The 3800 Series heat pump
features reverse cycle defrost and simultaneous supplemental
resistance heat, when needed, to maintain room comfort.
The Premium Line features the 5800 Series heat pump with
reverse cycle defrost and supplemental resistance heat, when
needed, to maintain room comfort, plus tactile touch controls
with digital display and standard corrosion protection.
Deluxe Line Standard Features:
• Universal Heaters
• 2 Fan Motors
• Heat Sentinel
• “L” Coil Design Condenser
• Locked-In-Place Control Knobs
• 3-Position Vent Door
• Freeze Sentinel
• Indoor Coil Frost Control
• Central Desk Control Interface
• Remote Thermostat Control Interface
• Random Restart
• Electronic Temperature Limiting
• “Smart Fan” Fan Cycle/Continuous Control
• Transfer Fan Interface
• Room Occupancy Sensor Interface
• Reverse Cycle Defrost and Simultaneous Supplemental
Resistance Heat on Heat Pumps
• Quick Heat Recovery
Deluxe Line Optional Features:
• Corrosion Protection
• Internal Condensate Removal (on 3800 Series Heat Pump
without Corrosion Protection)
NOTE: Dry Air 25 models include all the standard features of the 2800 Series plus
standard corrosion protection.
Premium Line Standard Features:
All the Standard Features of the Deluxe Line Plus:
• Two fan motor system with Indoor Cross Flow Blower
for quieter operation
• Digital Controls
—LED Temperature Display
—Easy Temperature Selection
—Tactile Touch Pad
• Unit Diagnostics
• Standard Corrosion Protection Treatment
Premium Line Optional Features:
• Internal Condensate Removal (Not for use in seacoast
or corrosive areas)
Advantages of the GE Zoneline System:
• Flexible Application
— May be installed from flush to finished floor to 3" from
the ceiling
— 7,100 to 14,700 BTUH units in same physical size
— Deluxe 2800 and 3800 Series may be ducted to condition
more than one room
— Compatible with Class 2 remote thermostat control
— Compatible with 2 wire CDC or many Energy
Management systems
• Economical Installation
— No ductwork necessary
— No mechanical equipment rooms or pipes required for
heating/cooling units
— Replacement units fit existing 42"-wide by 16"-high
wall cases
• Quiet Operation
— Indoor double cut-off scroll: two fan motor 2800 and 3800
Series units
— Indoor cross-flow blower: 2 fan motor 5800 Series units
• Energy-Saving Operation
— Units in unoccupied areas may be turned off
— Designed for efficient cooling operation — EERs from 10.0
to 13.0
— Efficient heat pump units — COPs from 3.2 to 3.6
— Extended heat pump operation without sacrificing
room comfort
• Ease of Maintenance
— Permanently lubricated fan motors
— Upfront lift-out interchangeable filters
— Air Discharge area is easily accessed for cleaning
— Slide-out chassis for easy access for cleaning or if
service is required
• Reverse Cycle Heat Pump Operation
Both the 3800 and the 5800 Series heat pumps utilize
the unique GE PTAC heat pump operation to ensure a
comfortable room. The logic used by the units is the
same logic used by central system heat pumps to
provide greater savings.
Loading ...
Loading ...
Loading ...