Loading ...
Loading ...
www.PyleUSA.com
3
MAKING THE CONNECTIONS
The control center divides the power from your receiver/amplier dierently to its
speaker terminals. (This is especially noticeable when you connect only one pair of
speakers. If you connect more than one pair of speakers, see "Impedance Chart" on
page 5 to selector the best terminals to connect.) For the best performance, make
the connections based on how frequently you use each set of speakers.
Cautions:
To avoid damaging your speakers or receiver/amplier:
• Be sure your receiver/amplier's power is turned off before you make the
connections.
• Never let the speaker wire's bare ends touch each other or the adjacent terminals
on the control center.
• Do not connect more than one pair of sepakers to each set of terminals.
Press open the desired SPK terminals on the control center. Insert the speakers'
positive (+) wires in the positive (red) terminals, and negative (-) wires into the
nagative (black) terminals, according to the respective L (left) and R (right) terminals.
Then press the tabs to close them.
Loading ...
Loading ...
Loading ...