Loading ...
Loading ...
Loading ...
10
CAUTION:
The appliance’s efficiency can be reduced if the pre-filter is not cleaned regularly.
Never use a pre-filter that is still damp.
The pre-lter is the only lter which can be re-used and washed with water. The 2 in 1 HEPA and active carbon
and NanoCaptur filters cannot be cleaned and re-used. Never wash with water.
To replace the lters, follow the instructions in the section “Disassembling/Reassembling lters” .
Your replacement lters are available under the following codes:
Filter Model
2 in 1 HEPA and active carbon lter Ref : XD6700
NanoCaptur Ref : XD6081
« TIPS FOR CHANGING FILTERS »
• Avoid handling used lters if you suer from allergies or asthma.
• Wear gloves when changing the lters, or wash your hands well afterwards.
• Put used lters directly into a closed, air-tight bag before throwing them away to avoid
spreading pollutants.
CLEANING SENSORS
The particle sensor and gas sensor need to be cleaned regularly (every 2 months) and appropriately.
Make sure you turn o and unplug the appliance before cleaning the pollution sensors and follow the
recommendations below:
1. Clean the air inlet and outlet using a soft brush or cloth.
2. Open the sensor cover located.
3. Lightly wet a cotton swab and remove any dust from the lens and the inlet/outlet. Wipe using a dry cotton swab.
4. Clean the gas sensor using a soft brush or vacuum cleaner.
IMPORTANT:
• Never use a detergent or metal object to clean the sensors.
• The eciency of the sensors may be reduced if not cleaned regularly.
• Cleaning frequency varies depending on the operating environment of the appliance. If it used in a dusty
environment, clean the sensors more frequently.
STORAGE
When you are not using the appliance, store it in a cool, dry place.
Loading ...
Loading ...
Loading ...