Loading ...
Loading ...
Loading ...
tery will be charged while connected to the ve-
hicle with the ignition switch in the ACC or ON
position.
While connected to the vehicle, the iPod姞 can
only be operated by the vehicle audio controls.
To disconnect the iPod姞 from the vehicle, remove
the USB end of the cable from the USB jack on
the vehicle, then remove the cable from the
iPod姞.
*iPod姞 is a trademark of Apple Inc., registered in
the U.S. and other countries.
Compatibility
The following models are compatible:
● iPod姞 5th Generation version 1.2.3
● iPod姞 Classic - version 1.1
● iPod姞 Touch - version 2.1*
● iPod姞 Nano - 1st generation version 1.3.1
● iPod姞 Nano - 2nd generation version 1.1.3
● iPod姞 Nano - 3rd generation version 1.0.2
● iPod姞 Nano - 4th generation version 1.0.4
● iPod姞 Nano - 5th generation version 1.0.1
* Some features of this iPod姞 may not be fully
functional.
Make sure that your iPod姞 firmware is updated to
the version indicated above.
Audio main operation
AUX button:
Place the ignition switch in the ACC or ON
position and press the AUX button repeatedly
until the iPod姞 mode is displayed on the screen.
If another audio source is playing and the iPod姞 is
connected, press the AUX button repeatedly to
switch to the iPod姞 mode.
If the vehicle audio system is turned off while the
iPod姞 is playing, the iPod姞 will start when the
VOL/ON-OFF control knob is pressed.
Interface:
The interface for iPod姞 operation shown on the
vehicle’s audio system display screen is similar to
the iPod姞 interface. Use the TUNE/SCROLL
knob and ENTER button to navigate the menus
on the screen. The iPod姞 MENU button on the
vehicle audio system is used to move up one level
in the iPod姞 menus.
Depending on the iPod姞 model, the following
items may be available on the menu list screen.
For further information about each item, see the
iPod姞 Owner’s Manual.
● Playlists
● Artists
● Albums
● Songs
● Podcasts
● Genres
● Composers
● Audiobooks
● ShuffleSongs
SEEK/CAT buttons:
Press the SEEK/CAT buttons
or to
skip backward or forward one track.
Press and hold the SEEK/CAT buttons
or for 1.5 seconds while a track is playing
to reverse or fast forward the track being played.
The track plays at an increased speed while
reversing or fast forwarding. When the button is
released, the track returns to normal play speed.
RPT button:
Press the RPT button while a track is playing to
change the play pattern as follows:
1 TRK RPT → ALL RPT → RPT OFF
1 TRK RPT: the current track will be repeated.
Monitor, climate, audio, phone and voice recognition systems 4-79
Loading ...
Loading ...
Loading ...