Loading ...
Loading ...
Loading ...
7
OPERATING YOUR ICEMAKER
Control Panel
The icemaker should be placed where the ambient temperature is between 61°F and 90°F (16°C to
32°C). If the ambient temperature is above or below this range, the performance of the appliance may be
affected. For example, placing the appliance in extremely cold or hot conditions may cause interior
temperatures to fluctuate.
ON/OFF Power
To turn the appliance on or off, press the ON/OFF button.
Setting the Temperature Control
● Connect the power cord to a properly grounded outlet. In the event of a power interruption, all
previous temperature settings are automatically erased, and the compartment will default to a
preset temperature setting of -18°C (-0.4°F).
● Set the desired cooling temperature by pressing the corresponding button or . Each
depression of the buttons will raise or lower the temperature setting by 1 degree. The
temperature selected will flash in the LED display for approximately 5 seconds, then revert back
to display the temperature of the interior cabinet.
NOTES:
● The temperature setting can be adjusted from -10°C to -30°C（from 14°F to -22°F).
● To view the “set” temperature anytime, press or once. The “set” temperature will flash in
the LED display for 5 seconds.
● This appliance has the option of displaying temperatures in either Celsius or Fahrenheit. To
change the setting, press the °C/°F button.
● The temperature inside the cabinet may vary slightly depending on whether stored items are
located in the upper/middle or lower section.
“Fast Freeze” Function
If you press and hold the °C/°F button for 3 seconds, the appliance will enter the “Fast Freeze” mode. In
this mode, press the and buttons to set the fast freezing time. The setting time range is 1 to 10
hours, and the default setting time is 3 hours. If you set the fast freezing time longer than 4 hours, the
appliance will defrost itself at the end of the “Fast Freeze” cycle. To stop the “Fast Freeze” function,
again press the °C/°F button and hold it for at least 3 seconds.
Defrosting
The icemaker’s frost-free feature eliminates the need for manual defrosting. Defrosting takes place
approximately every 14 hours (except when in the “Fast Freeze” mode); the defrost cycle lasts about 40
minutes. Melt water from the defrosting collects in a drip tray where it is evaporated. During the process
of defrosting, the temperature display may be higher than the set temperature.
You can force the appliance into defrost mode at any time by pressing and holding the button for 3
seconds.
Control
panel
Loading ...
Loading ...
Loading ...