Loading ...
Loading ...
Loading ...
ICE FULL INDICATION
If the ice cube bucket is completely full with ice cubes, the icon will appear on the
LCD and emit a beeping sound for a reminder. Take out the ice cubes and then press
button, the icon will turn to .
LOW WATER INDICATION
When the water line drops beneath the “H-MIN” mark, it means it is too low. The icon
will flash on the LCD and a beeping sound reminder will be sent out. Fill tank with
more potable water and then press button to resume making ice. The icon will
stop flashing.
If there is a malfunction the icon will flash on the LCD. Check to see if ice
making box is in correct position. Adjust if necessary and contact customer service
department for more assistance.
AUTO TURN-ON AND TURN-OFF FUNCTION
• Press the “SET” button to cycle through the setting of real time, auto turn-on time
and auto turn-o time. When setting one type of time, the corresponding icon will
appear on the left hand side of LCD.
• Press the p button to adjust the hour or minute numeral of the time. You can adjust
the time only when the numeral is flashing (lasts for several seconds). If you press p
when time numerals are still, the presses will lead to the timer function selection.
NOTE: This is a 24-hour type clock. For example, 8PM will show “20:00.” Please keep
this in mind when setting real time, auto turn-on and auto turn-o.
• When the hour or minute numeral flashes, one press of “SET” button can directly
reach the next setting. For example, Press the “SET” button once and then press p
to adjust the hour of real time. If the hour numeral still flashes, just press “SET” once
to set the minute of real time; if the hour flashing stops, you need to press the “SET”
twice to set the minute. Then, if the minute numeral keeps flashing, you can press
“SET” once to adjust the hour numeral of auto turn-on time, but if the flashing stops,
you need to press “SET” three times to adjust the hour of auto turn-on time.
• When the time numerals are still, you can directly reach the real time setting by one
press of “SET”, the auto turn-on time setting by three presses of “SET” and the auto
turn-o time setting by five presses.
• When time settings are finished, press the p button to select which function you
want. The presses of p will cycle through auto turn-on, auto turn-o, both auto-on
and auto turn-o and no timer. Your function choices will be shown on the LCD by
corresponding icons.
Page 10
SET UP & USE
Loading ...
Loading ...
Loading ...