Loading ...
Loading ...
Loading ...
16
Basic Operation (Continued)
Switching the Input Modes (INPUT1/
INPUT2/INPUT3/INPUT4/INPUT5(PC)/TV)
Turn on the power of the connected video equipment.
Press INPUT to select the applicable input source. The
screen changes in order of INPUT1, INPUT2, INPUT3,
INPUT4, INPUT5 (PC) and TV mode each time INPUT
is pressed.
A
• INPUT1 or INPUT2:
Used for video equipment connected to the COMPONENT input
terminals.
• INPUT3:
Used for video equipment connected to the INPUT3 termi-
nals.
The S-video input terminal is additionally provided for the
INPUT3 terminal. If both the S-video terminal and normal
video terminals are connected with cables, the S-video input
terminal takes priority.
• INPUT4/OUTPUT:
INPUT4 mode is used to adjust the preset settings and IN or
OUT can be selected. INPUT4 indication is not displayed
when OUT is selected. (For details on setting INPUT4
SELECT, see page 24.)
• INPUT5:
If you connect the PC to the PC-IN terminals, you can view
the PC image on the LCD TV set.
1
2
INPUT3 mode
INPUT3
INPUT5
PC
INPUT5
(
PC
)
mode
INPUT4
INPUT4 mode
TV mode
2
INPUT2
480P
INPUT1
480P
INPUT2 mode
INPUT1 mode
Sound Volume
■ To adjust the volume
● Press VOL (+) to increase the sound volume.
The bar indicator shifts right.
VOLUME
50
● Press VOL (–) to decrease the sound volume.
The bar indicator shifts left.
VOLUME
10
■ To mute the sound
● Press MUTE to temporarily turn off the sound.
The MUTE mark
is displayed for 4 seconds.
● Press MUTE or VOL (+)/(–) to turn the sound back to the
previous level.
The mute function is automatically turned off when any of
the following buttons are pressed: POWER, MUTE,
VOL (+)/(–) or MTS.
VOLUME
10
A
• When VOL (+)/(–) is pressed in the Mute mode, the sound turns
on and the volume indicator is displayed.
• The Mute function is canceled when POWER is pressed.
■ To select MTS (Multichannel TV Sound)
Press MTS to display the MTS screen.
Press MTS to select the MTS settings.
STEREO: stereo audio
SAP: secondary audio program
MONO: monophonic audio
STEREO
<
ON A I R
<
ON A I R
SAP
M
ONO
A
• “ON AIR” appears when a STEREO or SAP broadcast is being
aired.
1
2
LC-20B8U_E_P13-18.p65 05.2.3, 2:04 PM16
Loading ...
Loading ...
Loading ...